Point-to-Point Wireless Technology – Is It for Your Business?

Share on facebook
Share on twitter
Share on linkedin
Colleagues working at a business that uses point to point wireless connection for their internet.

Point-to-point wireless is a wireless technology that transfers data between two fixed locations without the use of cables. It can be used to link devices and sensors in homes, offices, and businesses or provide point-to-point links for discussing confidential information in any setting that does not allow an exchange of physical media. Radio waves or light beams can be used to establish point-to-point links between devices. The technology is used by organizations that need to communicate without the risk of information leakage.

If you are still on the fence, the information you’ll find here about P2P wireless technology can help you make a decision that’s right for you:

How Does Point to Point Wireless Technology Work?

Point to point wireless connections are established by having an antenna as well as a radio device at both ends of the link. The antenna is connected to your own internal wired infrastructure, so you have a wireless bridge between both ends.

Think of it as throwing cables between each end of your target range. This is how well-installed wireless links operate. When information is requested or sent to the remote end, it is done via an Ethernet cable to the radio. This is then converted by the radio, sent over the air, and converted back into an Ethernet connection.

What Can You Use a Point to Point Wireless Connection for?

You can use point-to-point wireless for IP telephony, corporate WAN connections, CCTV, Scarda/telemetry applications, and internet access. In a nutshell, point-to-point wireless can be utilized for the connection of any application you want to use to communicate with another location or device in another geographic location without the use of cables.

What Are Line of Sight Requirements?

Typically, a wireless bridge works best when there is a clear line of sight between the two points. But when there is a partial view, like when a few tree branches or some buildings partially block the view, the bandwidth drops. If you’re building a bridge that needs to go through several buildings, your challenge is finding the right radiofrequency.

The Fresnel Zone is an imaginary circle around an antenna, where the signal’s power drops away exponentially because it is absorbed by the material. In most cases, a wireless bridge will not be able to form a complete connection if it cannot “see” its partner antennas because solid objects block the Fresnel Zones. Still, some bridges can form at lower frequencies because of the multi-path between surrounding buildings.

Lower frequencies mean longer wavelengths. The longer the wavelength, the better it can go through obstacles. This means that even though you can’t see your neighbor, you might be able to send data over an ultra-long wavelength.

Why Your Business Can Benefit From Point to Point Wireless Technology

It Can Be Used in Any Environment

Point to point wireless will work in any environment with an Ethernet connection that runs to a radio. That can include homes, offices, schools, or even industrial complexes.

It Is Private

Point-to-point wireless does not broadcast, and therefore it can be used for applications where privacy is key to its operation.

It Is Cost-Effective

This technology is cost-effective because it needs no additional hardware. All you need is a radio and an antenna.

It Is Easy to Set Up

Because you do not need any additional hardware, you can set up point-to-point wireless in a matter of minutes. You can simply connect your existing wired infrastructure to the radio, and you are set to go.

Conclusion

Point to point wireless technology has taken the world by storm. It is used to bridge the distance between two points, regardless of whether they are in the same building, in the same town, or in different countries. It is indeed a great option for businesses needing wireless networking in Calgary.

TP Communications can provide you with P2P wireless networking in Calgary. Contact our team today so we can customize a solution that will meet your exact needs!